Need help?Do you have a question about the Raise3D E2 and is the answer not in the manual?
General| Build Volume | 330 x 240 x 240 mm |
|---|---|
| Layer Resolution | 0.01 - 0.25 mm |
| Max Extruder Temperature | 300°C |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Print Speed | 30 - 150 mm/s |
| Frame Material | Aluminum |
| Number of Extruders | 2 |
| Build Plate | Heated, removable |
| Display | 7-inch touchscreen |
| Nozzle Diameter | 0.4 mm |
| Max Bed Temperature | 110 °C |
| Printer Dimensions | 607 x 596 x 465 mm |
| Supported Materials | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, Nylon |
| Power Requirements | 100-240V, 50/60Hz, 600W |
To Next Page
