To Next PageTo Next Page
Need help?Do you have a question about the Raise3D Pro3 Series and is the answer not in the manual?
General| Print Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 110°C |
| Print Speed | 10 - 150 mm/s |
| Filament Diameter | 1.75 mm |
| Build Volume | 300 x 300 x 300 mm |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, PETG, ASA, PC, TPU, Nylon, Carbon Fiber, Glass Fiber |
| Connectivity | Wi-Fi, Ethernet, USB |
| Touchscreen | 7-inch |
| Operating System | Raise3D OS |
Steps for calibrating Z probe offsets, bed leveling, and nozzle XY offsets.
Step-by-step instructions for installing ideaMaker on Windows operating systems.
Instructions for installing ideaMaker on macOS, involving disk image and applications folder.
Selecting the correct printer model during the first launch of ideaMaker.
Procedure for loading filament into both left and right extruders.
Steps for assigning models and initiating the slicing process for dual extrusion.
Inserting USB, selecting the file, and beginning the dual extrusion print.
Loading filaments and checking extruder ranges for dual color setup.
Aligning models, configuring per-extruder settings, and advanced slicing options.
