Raise3D Pro3 Plus - User Manual

User Manual
* Please review this entire manual before operating the printer.
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Pro3 Series 3D Printer
Pro3 Pro3 Plus

Summary

A. Safety

General Safety Information

Important general guidelines and warnings for safe printer operation and maintenance.

Intended Use and Environment

Safe Installation Guidelines

Key safety instructions to follow during the printer's installation process.

F. Hardware Installation

Initial Setup and Safety Removals

Removing shipping ties, security clips, and bolts before powering on.

Powering On and Initial Boot-up

Connecting power, starting the printer, and its initial startup sequence.

Calibration Procedures

Detailed steps for nozzle offset and bed leveling calibration for optimal performance.

G. ideaMaker Installation

Windows Installation Guide

Step-by-step guide for installing ideaMaker software on Windows.

macOS Installation Guide

Instructions for installing ideaMaker software on macOS.

J. Dual Extruder Printing

Filament Loading Process

Step-by-step guide for loading filament into both the left and right extruders.

Slicing for Dual Extrusion

Starting and Monitoring the Print

Loading sliced files and starting the dual extrusion print, then monitoring its progress.

K. Dual Color Printing

Filament Setup and Alignment

Slicing Parameter Configuration

Raise3D Pro3 Plus Specifications

General

Print Technology	Fused Filament Fabrication (FFF)
Max Extruder Temperature	300°C
Max Bed Temperature	110°C
Connectivity	USB, Ethernet, Wi-Fi
Dual Extrusion	Yes
Filament Diameter	1.75 mm
Frame Material	Aluminum
Build Volume	300 x 300 x 605 mm
Nozzle Diameter	0.4 mm (default)
Print Speed	150 mm/s
Supported Filament Types	PLA, ABS, PETG, TPU, PC, Nylon
Touchscreen	Yes
Build Plate	Heated, removable
Power Requirements	110-240 V, 50/60 Hz, 600W