Raise3D Pro3 Plus - Technical Specifications

Pro3 Series 3D Printer / User Manual
Printer
Pro3 Pro3 Plus
Single Extruder Print Dual Extruder Print Dual Extruder PrintSingle Extruder Print
300×300×300 mm 255×300×300 mm 300×300×605 mm 255×300×605 mm
620×626×760 mm 620×626×1105 mm
Electrical
Power Supply Input
Power Supply Output
100-240 V AC, 50/60Hz 230 V @ 3.3 A
24 V DC, 600 W
Print Technology
Print Head System
Filament Diameter
XYZ Step Size
Print Head Travel Speed
Build Plate
Max Build Plate Temperature
Heated Bed Material
Build Plate Leveling
FFF
Dual-head with electronic lifting system
1.75 mm
0.78125, 0.78125, 0.078125 micron
30-150 mm/s
Flexible Steel Plate with BuildTak
120 ℃
Silicone
Mesh-leveling with Flatness Detection
Filament Run-out Sensor Available
General
Supported Materials
Nozzle Diameter
Max Nozzle Temperature
Connectivity
Noise Emission (Acoustic)
Operating Ambient Temperature
Storage Temperature
Filter
PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/
Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill
0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
300 ℃
Wi-Fi, LAN, USB port, Live camera
＜55 dB (A) when building
15 - 30 °C, 10 - 90% RH non-condensing
-25 to +55 °C, 10 - 90% RH non-condensing
HEPA filter with activated charcoal
EVE Smart Assistant Available
Software
Slicing Software
Supported File Types
Supported OS
Machine Code Type
ideaMaker
STL/ OBJ/ 3MF/ OLTP
Windows/ macOS/ Linux
GCODE
Printer Controller
User Interface
Network
Power Loss Recovery
Screen Resolution
Motion Controller
Logic Controller
Memory
Onboard Flash
OS
Ports
7-inch Touch Screen
Wi-Fi, Ethernet
Available
1024×600
Atmel ARM Cortex-M4 120MHz FPU
NXP ARM Cortex-A9 Quad 1 GHz
1 GB
8 GB
Embedded Linux
USB 2.0*2, Ethernet*1
Layer Height 0.01 - 0.25mm
Build Volume
(W×D×H)
Machine Size
(W×D×H)
C. Technical Specifications
08