Pro3 Series 3D Printer
/ User Manual
E. Safety Marks
To facilitate operation and maintenance, please keep a proper distance of 50cm on the
side of the printer, 80cm on the front, 20cm on the back, and 60cm on the top during
installation. No flammable materials are allowed around the installation location.
Installation
1
Filament and Electrical Precautions
2
It is strongly recommended to use Raise3D official filaments and/or default settings for
better performance. The Raise3D printer is designed with strong compatibility with
filaments. However, please be very careful when using unverified filaments and settings.
This may cause abnormal printing tasks or damage the printer.
Please consult Raise3D or authorized dealers in your area for technical support and
services.
Warning: The printer belongs to EN55032 Class A. In a residential environment, the
printer may cause radio interference.
Odor
3
When the printer is operating, it emits a thermoplastic smell.
NOTE: Please place the printer in a well-ventilated and dry environment.
13
To Next Page
Loading...
