Raise3D PRO2 Series User Manual

Quick Start Guide
Pro2-Series 3D Printer
* Please review this entire guide before operating the printer.
Pro2 Pro2 Plus
01 02
03 04 05 06
07 08 09 10
11 12 13 14
15 16 17 18
19 20 21 22
23 26
24 25
27

Raise3D PRO2 Series Specifications

General

Build Volume	305 x 305 x 300 mm
Layer Resolution	0.01 - 0.25 mm
Print Technology	Fused Filament Fabrication (FFF)
Print Speed	30 - 150 mm/s
Max Nozzle Temperature	300°C
Filament Diameter	1.75 mm
Display	7-inch Touch Screen
Number of Extruders	2
Nozzle Diameter	0.4 mm
Max Bed Temperature	110°C
Supported Materials	PLA, ABS, TPU, Nylon, Carbon Fiber
Connectivity	Wi-Fi, USB

Summary

B. Hardware Installation

Step 1: Remove Shipping Zip Ties

Guidance on safely removing the four shipping zip ties securing the printer.

Step 5: Printer Start-up Sequence

Description of the printer's boot-up sequence and ready state indication.

Step 14: Install Filament Holders

Instructions for installing filament holders into mounting points and placing filament.

Step 16: Load Filament into Nozzle

Procedure for setting nozzle temperature and loading filament via the touchscreen.

Step 2: Remove Security Spacers

Instructions for peeling the yellow sticker and removing 24 security spacers.

Step 6: Z Homing Procedure

Instructions to home the Z axis and move the print bed to the origin position.

Step 15: Feed Filament Through Guide Tube

Guidance on locating the filament end and feeding it through the guide tube.

Step 3: Remove Z-Axis Security Bolts

Procedure for removing four hex head security bolts from Z-axis clamps.

Step 4: Connect Power Cable

Instructions for plugging the machine into a wall outlet using the power adapter.

B. Hardware Installation

Step 8: Lower Z Platform

Instructions to lower the Z platform by 50mm using the move steps function.

Step 12: Mount Build Plate

Guidance on sliding the build plate onto the Z platform with correct orientation.

C. ideaMaker Installation

Windows Installation Guide

Steps for installing ideaMaker on Windows, including choosing language and location.

Windows Installation Steps

Continuing Windows installation: component selection, installation completion, and finishing.

macOS Installation Guide

Instructions for installing ideaMaker on macOS by dragging the application to the folder.

D. ideaMaker Initial Settings

Step 1: Select Printer Model

Procedure for selecting the printer model from the drop-down list during initial setup.

Step 2: Select Filament Diameter

Setting the filament diameter, noting that Pro2-Series printers use 1.75mm filaments.

E. Using ideaMaker

Step 4: Edit Platform Addition and Support

Selecting Platform Addition and Support types in the 'Edit' window.

Step 5: Save Sliced Files to USB

Exporting sliced files (.gcode and .data) to the USB storage drive.

Step 3: Confirm Settings and Edit Template

Confirming printer type and material, then selecting 'Edit' for template options.

F. Start First Print

Step 2: Check Nozzle-Platform Distance

Step 5: Select and Print Test File

Step 3: Adjust Z-Plate Screw for Leveling

H. Dual-Extruder Print - Slicing

Step 1: Import Dual Extruder Models

Step 3: Assign Right Extruder to Model

Step 6: Edit Platform Addition and Support

Step 2: Assign Left Extruder to Model

Step 7: Save Dual Extrusion Sliced Files

Step 5: Confirm Settings and Edit Template

H. Dual-Extruder Print - Hardware Installation

Step 1: Install Right Filament Holder

Step 3: Load Right Filament into Nozzle

Step 2: Feed Right Filament Through Guide Tube

H. Dual-Extruder Print - Start First Print

Step 1: Home Axes and Reposition Head

Home X/Y and Z axes, then reposition the print head for dual extrusion setup.

Step 7: Move Right Nozzle Down

Step 10: Adjust Z-Plate Screw for Leveling

Step 2: Set Nozzle Temperature for Dual Print

Step 5: Check Nozzle-Platform Distance

Step 3: Move Left Nozzle Down

Step 6: Adjust Z-Plate Screw for Leveling

Step 9: Check Nozzle-Platform Distance

Step 12: Select and Print Dual Extrusion File