Raise3D PRO2 Series - Step 1: Import Dual Extruder Models; Step 2: Assign Left Extruder to Model

Pro2-Series 3D Printer / Quick Start Guide
H. Dual-Extruder Print - Slicing
Open ideaMaker, Click the "+" button to import your two models (.stl/.obj/.3mf file). You can
download a file or use the test model included in the USB storage drive.
1
Choose one of the models and set its designated Extruder as Left Extruder from the left side
'Model Info' window.
2
01 02
03 04 05 06
07 08 09 10
11 12 13 14
15 16 17
18
19 20 21 22
23 2624 25
27