How to Replace the Thermocouple -V1.0 Date: 11/20/2020
- 1 / 8 -
www.raise3d.com
Pro2 - How to Replace the Thermocouple - V1.0
Tools:
① 1.5mm hex wrench
② 2.5mm hex wrench
③ Flat head screwdriver
④ Flush cutter
1. Lower the build plate.
1) In the “Utilities tab”, lower the Z-Axis platform by selecting the down arrow.
2) Lower the plate until you have enough space to comfortably maneuver tools within the area.
Note
: The recommended value of Z-axis is 150-250mm.
To Next Page
