Need help?Do you have a question about the Raise3D Pro2 and is the answer not in the manual?
General| Build Volume | 305 x 305 x 300 mm |
|---|---|
| Layer Resolution | 0.01 - 0.25 mm |
| Print Technology | Fused Filament Fabrication (FFF) |
| Print Speed | 30 - 150 mm/s |
| Max Extruder Temperature | 300°C |
| Max Bed Temperature | 110°C |
| Connectivity | USB, Ethernet, Wi-Fi |
| Dual Extrusion | Yes |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Number of Extruders | 2 |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Supported Filament Types | PLA, ABS, PETG, TPU, Nylon, Carbon Fiber, Metal Filled, Wood Filled |
| Touchscreen | 7-inch touchscreen |
| Power Requirements | 110-240 V AC, 50/60 Hz |
To Next Page
