Raisecom ISCOM2126 - Layer-2 Port Configuration Settings

Beijing Raisecom Science & Technology Co., Ltd
ISCOM2126 EMS User Manual 2
2.1 Layer-2 Port Configuration
Click [Main Menu\Port\Port Settings] to launch the Port Settings dialog box. Select one or more
rows from the port table, and click the <Modify> button to configure port information. The following figure
is an example of this box.
Related commands:
See chapter 3 of “ISCOM126 Switch Command Notebook” for
interface port and pvid commands.
Figure 2-1 The Port Settings dialog box
2.2 Switch Information
Click [Main Menu\Device\Device Settings] to launch the Device Settings dialog box, which is useful
for configuring some basic information of Switch. The following figure is an example of this window.
Related commands:
See chapter 3 of “ISCOM126 Switch Command Notebook” for
arp timeout
mac-address-table aging-time
storm_control
pvid-space
svl
stp
clockset
commands.