Beijing Raisecom Science & Technology Co., Ltd
ISCOM2126 EMS User Manual 12
Figure 2-12 ARP Configuration
2.13 Spanning Tree Protocol Configuration
Click [Main Menu\Device\STP] to launch the SPT dialog box. It enables you to view and configure
the Spanning Tree Protocol information of Switch. The following figure is an example of this window.
Related commands:
See chapter 3 of “ISCOM126 Switch Command Notebook” for
stp
stp forward-delay
stp hello-time
stp max-age
stp path-cost
stp priority
commands.
To Next Page
Loading...
