Rajant BreadCrumb ME3 User Manual

BreadCrumb
®
ME3 User Guide Rajant Corporation
Version: 1.02 03-100116-001
Warning
The BreadCrumb ME3 Status LED may exhibit a short blink after a warm reset
condition that occurs due to system error or is initiated by the user (e.g., performing
a reboot command through BC|Commander, performing the Zeroize Keys and
Restore Factory Defaults procedure). The LED must be physically masked (such as
adding tape to the LED lens) to guarantee that no light is emitted at any time.
1.3.7 Internal Battery
BreadCrumb ME3 contains a polymer Lithium-ion internal battery with 3600 mAh nominal
capacity, and 3.7 V nominal voltage. The battery is used only when the ME3 detects that no external
power supply is connected to the device.
The battery status can be monitored through BC|Commander. For more information on battery
status monitoring refer to the BC|Commander User Guide document.
Caution
The internal battery will charge only when the external power supply voltage is 9 V
or greater.
10

Rajant BreadCrumb ME3 Specifications

General

Brand	Rajant
Model	BreadCrumb ME3
Category	Network Hardware
Language	English