BreadCrumb
®
ME3 User Guide Rajant Corporation
Version: 1.02 03-100116-001
Problem Resolution
your wireless card.
● Ensure that the wireless client’s IP address
settings are configured properly.
● Ensure that the security settings on the client
device and BreadCrumb devices match.
● Ensure that the client device is not prevented
from connectingby an ACL.
● If the BreadCrumb devices comprising the
network have AirFortress encryption
enabled, ensure that the client does as well.
5.2 BreadCrumb Device Cannot Connect to BCWN
Table 7: BreadCrumb to BCWN Connectivity Issues.
Problem Resolution
Discharged batteries can cause the BreadCrumb
device to appear to power up, but not be able to
establish connectivity to the BCWN.
When deploying the BCWN, ensure that the
batteries are charged.
When using external antennas, faulty cable
connections or crimped cables can result in
difficulty establishing and maintaining network
connectivity.
Check antenna cables and their connections to
the BreadCrumb device.
22
To Next Page
Loading...
