LM01 I&M MANUAL/EN/11.30.2010
46/65
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise emplo
yed in any manner whatsoever without the express written consent of R&M MATERIALS HANDLING, INC.
Copyright © (2010) R&M MATERIALS HANDLING, INC. All rights reserved.
6.2 Lubrication
OPEN WHEEL GEARING: MOBILUX EP1 OR EQUIVALENT
Table 7. Lubrication Specifications
LUBRICATION POINT / QTY SPECIFICATIONS POSSIBLE BRANDS
AS REQUIRED Oil or liquid grease Chain lubricant (Ceplattyn or similar) EP-90
AS REQUIRED GREASE (without MoS2)
KP 2 (DIN 51 502)
Soap-based lithium
Temperature -4°F to 266°F
BP Energrease LS - EP 2
ESSO Unirex N2
Mobil grease HP
Shell Alvanio EP Grease 2
0.05 LITER KP 0 K grease (DIN 51502)
Soap-based lithium + MoS2
Temperature -30°C to 130°C
Mobil grease special
BP Multi-purpose grease L 21 M
Shell Retimax AM
Texaco Molytex grease EP 2
To Next Page
Loading...
