LM01 I&M MANUAL/EN/11.30.2010
55/65
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise emplo
yed in any manner whatsoever without the express written consent of R&M MATERIALS HANDLING, INC.
Copyright © (2010) R&M MATERIALS HANDLING, INC. All rights reserved.
Table 13. Lifting Assembly Parts List
ITEM PART NUMBER DESCRIPTION QTY
1 2218045 1-FALL LOAD BLOCK ASSEMBLY 1
1a 001512 1-FALL SAFETY LATCH – WIRE TYPE 1
1a 2212016 1-FALL SAFETY LATCH – STEEL PLATE 1
1b 2218046 1-FALL LOAD HOOK 1
1c 2218047 1-FALL LOAD BLOCK HALVES, PIN AND HARDWARE 1
1d 2213454001 1-FALL LOAD BLOCK CAPACITY STICKER – 1/8 TON (NOT SHOWN) 2
1d 2213454002 1-FALL LOAD BLOCK CAPACITY STICKER – 125 kg (NOT SHOWN) 2
2 2218048 2-FALL LOAD BLOCK ASSEMBLY 1
2a 001512 2-FALL SAFETY LATCH – WIRE TYPE 1
2a 2212016 2-FALL SAFETY LATCH – STEEL PLATE 1
2b 2218046 2-FALL LOAD HOOK 1
2c 2218085 2-FALL LOAD HOOK HALVES, SPROCKET, AXLE, AND HARDWARE 1
2d 2213308016 2-FALL CAPACITY STICKER – 125 kg (NOT SHOWN) 1
2d 2213308007 2-FALL CAPACITY STICKER – 250 kg (NOT SHOWN) 1
2d 2213308006 2-FALL CAPACITY STICKER – 1/8 TON (NOT SHOWN) 1
2d 2213308001 2-FALL CAPACITY STICKER – 1/4 TON (NOT SHOWN) 1
3 2218024 CHAIN GUIDE KIT 1
4 2218025 SLACK FALL STOP ASSEMBLY 1
5a 2218026 CHAIN CONTAINER & HARDWARE – 26FT (8m) MAX 1
5b 2218027 CHAIN CONTAINER & HARDWARE – 52FT (16m) MAX 1
5c 2218028 CHAIN CONTAINER & HARDWARE – 96FT (30m) MAX 1
6 2218029 UPPER / LOWER LIMIT SWITCH ASSEMBLY 1
7a 2218075 LOAD CHAIN – ZINC PLATED
*
7b 52288187 LOAD CHAIN – BLACK
*
7c 52288934 LOAD CHAIN – STAINLESS STEEL (CHECK CAPACITY LIMITS)
*
8a 2218076 RUBBER BUFFER (BUMPER) 1-FALL 2
8b 2218076 RUBBER BUFFER (BUMPER) 2-FALL 3
9 2218077 LOAD CHAIN INSERTION TOOL 1
10 9995008 LOAD CHAIN LUBRICANT 1
* NOTE: REFER TO CHAIN HOIST LIFT AND NUMBER OF FALLS FOR CHAIN QUANTITY
To Next Page
Loading...
