EasyManua.ls Logo

R&M LOADMATE LM 10 - Safety Precautions and Hazard Definitions

R&M LOADMATE LM 10
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LM01 I&M MANUAL/EN/11.30.2010
6/65
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise emplo
yed in any manner whatsoever without the express written consent of R&M MATERIALS HANDLING, INC.
Copyright © (2010) R&M MATERIALS HANDLING, INC. All rights reserved.
1.4 Safety
Rea
d and understand this manual before using the hoist.
Important issues to remember during installation, operation, maintenance, and inspection are provided at the
hoist control stations, at various locations on the hoist, in this manual, and in the LoadMate® Electric Chain
Hoist Operator’s Manual. These issues are indicated by DANGER, WARNING, or CAUTION instructions or
placards that alert personnel to potential hazards, proper operation, load limitations, and more.
m
DAN
GER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
m
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
m
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
Taking precedence over any specific rule, however, is the most important rule of all:
“USE COMMON SENSE”
It is a responsibility of the hoist owner / user to establish programs to:
1. Train and designate hoist operators, and
2. Train and designate hoist inspectors / maintenance personnel.

Table of Contents

Related product manuals