Running an EMI Band Evaluation Test
01.00 Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 34
The resultant
table shall be stored in the Result Table folder adding the current
time in the file name.
By clicking this button the test will Exit the measurement mode.
Store a Single
Measurement
Result
By clicking this button the measurement will be saved/recorded
at the selected frequency. Another frequency can be selected,
where measurement shall be performed, by clicking on
Frequency Step Forward Button .
4.3 Test Results
After the execution of the test, result tables will be generated for every Band
(subrange) as defined in the Test Template.
To Next Page
Loading...