Configuration of EMI Automotive Band Evaluation Test
01.00 Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 7
Figure 5: Device List with example devices used in this App Note
The switch unit (Figure 6) should have all paths needed prepared It depends on the
switch unit whether the user can edit the paths directly or he has to import them, like
OSP. After that we can use them in the hardware setup placed behind the tab “Test
Setup” of the EMI Automotive template editor.
Figure 6: OSP with settings for paths as an example for a switch unit
2.2 EMI Automotive Test Template Editor explained
In order to create a new test case a Template Editor shall be configured according to
the test requirement.
To Next Page
Loading...