Additional Information
01.00 Rohde & Schwarz EMI Automotive Band Evaluation with R&S©EMC32-K51 – 1SP07- 42
Figure 52: How to change start conditions
Figure 53: If "Do not activate the Measurement Mode on New tests" is unchecked
the tool Bar allows to leave Measurement Mode
2 Switched to Measurement Mode Manually on execution of the Test.
The test will be started in the analysis mode and will not be in Measurement
mode. This can be done if the option "Do not Activate Measurement Mode on
New Test" is selected in the "Option: File/Test" from the menu (Error!
eference source not found.).
To Next Page
Loading...