Basic Operations
R&S
®
ESR
61Getting Started 1316.3749.02 ─ 09
Hiding softkeys
You can hide the softkey display, e.g. when using remote control, in order to
enlarge the display area for the measurement results. When you press a function
key on the front panel, the softkeys are displayed temporarily, enabling you to
perform a certain task with the softkeys. They are then automatically hidden again
when they have not been used for a specified time. Any edit dialog boxes
required for entry remain in the display.
1. Press the [DISPLAY] key.
2. In the "Display Settings" dialog box, select "Softkey Bar State: Off".
The softkeys are no longer displayed.
► To display the softkeys again, select "Softkey Bar State: On".
Remote:
DISP:SKEY:STAT OFF
6.2.8 Context-sensitive Menus
Markers and traces in the display, as well as the information in the channel bar,
have context-sensitive menus. If you right-click on a marker or trace in the dis-
play, or information in the channel bar (or touch it for about 1 second), a menu is
displayed which contains the same functions as the corresponding softkey. This is
useful, for example, when the softkey display is hidden (see Chapter 6.2.7, "Soft-
keys", on page 59).
Means of User Interaction
To Next Page
Loading...
