R&S QPS Walk2000 User Manual

Maintenance
R&S
®
QPS Walk2000
23Getting Started 1179.5782.02 ─ 03
6 Maintenance
The R&S QPS Walk2000 does not require regular maintenance. It only requires occa-
sional cleaning.
● Calibration and self-test.......................................................................................... 23
● Cleaning..................................................................................................................23
● Replacing fuses.......................................................................................................24
● Storage....................................................................................................................24
● Transport.................................................................................................................25
● Disposal.................................................................................................................. 25
6.1 Calibration and self-test
The R&S QPS Walk2000 tests and calibrates itself on every start up of the "GUI
Power" and on an ongoing basis when the scan functionality is running. The self-test
and calibration take a few minutes. If it becomes necessary (for example if the "Signal
Bar" is red even if the gate is empty), you can also initiate a calibration via the "Power"
icon.
For calibration, the gate must be empty.
You can initiate a self-test when the "Power" icon is red.
1. If the "Power" icon is green: Select the "Power" icon.
The "Power" icon turns red.
2. Select the red "Power" icon.
The status lights on the gate and the touchscreen turn blue and remain blue until
the process ends.
3. Wait a few minutes until the self-test and calibration are done.
6.2 Cleaning
Cleaning the gate
Clean the inside of the gate with a lint‑free duster. You can remove stubborn dirt with a
damp rag.
Cleaning the platform
Clean the platform with a broom or vacuum cleaner. Be careful not to damage the gate.
Remove any stubborn dirt using a damp rag. You can add a neutral, non‑abrasive
cleaning agent to the cleaning water.
Cleaning

R&S QPS Walk2000 Specifications

General

Brand	R&S
Model	QPS Walk2000
Category	Scanner
Language	English