Safety and regulatory information
R&S
®
QPS Walk2000
8Getting Started 1179.5782.02 ─ 03
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life. For more information, see "Disposing electrical and
electronic equipment" on page 25.
Take care when handling electrostatic sensitive devices.
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The sig-
nal word indicates the severity of the safety hazard and how likely it will occur if you do
not follow the safety precautions.
WARNING
Potentially hazardous situation. Could result in death or serious injury if not avoided.
CAUTION
Potentially hazardous situation. Could result in minor or moderate injury if not avoided.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to other
property.
1.4 Regulatory information
The R&S QPS Walk2000 complies with the following regulations.
1.4.1 Regulations for the USA
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
This equipment may only be operated indoors. Operation outdoors is in violation of
47 U.S.C. 301 and could subject the operator to serious legal penalties.
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
●
This device may not cause interference.
●
This device must accept any interference, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
Regulatory information
To Next Page
Loading...
Need help?
General
