R&S ZNA26 - Page 1359

Command reference
R&S
®
ZNA
1359User Manual 1178.6462.02 ─ 20
<Pt> Port number
Usage: Query only
Options: R&S ZNAxx-B16
Manual operation: See "Receiver Input" on page 622
[SENSe<Ch>:]PATH<Pt>:MEASurement:IFINpath?
[SENSe<Ch>:]PATH<Pt>:REFerence:IFINpath?
Query for the input paths of Direct IF Access Input / Output connectors IF Reference
<Pt> and IF Meas <Pt> in channel <Ch>.
To set the input paths, use [SENSe<Ch>:]PATH<Pt>:IFINpath.
Suffix:
<Ch>
.
Channel number
<Pt> Port number
Usage: Query only
Options: R&S ZNA-B26
Manual operation: See "Rear Input Path" on page 623
[SENSe<Ch>:]PATH<Pt>:MEASurement:IFOutauto?
[SENSe<Ch>:]PATH<Pt>:REFerence:IFOutauto?
Queries how the outgoing frequencies at IF Reference <Pt> and IF Meas <Pt> are
determined in channel <Ch> if [SENSe<Ch>:]PATH<Pt>:IFSWitch is set to OUT.
To define how the frequencies are determined, use [SENSe<Ch>:]PATH<Pt>:
IFOutauto.
Suffix:
<Ch>
.
Channel number
<Pt> Port number
Usage: Query only
Options: R&S ZNA-B26
Manual operation: See "Auto Determine IF Out" on page 622
[SENSe<Ch>:]PATH<Pt>:MEASurement:IFRequency?
[SENSe<Ch>:]PATH<Pt>:REFerence:IFRequency?
Queries the freqency conversion formula for Direct IF Access Input / Output ports IF
Reference <Pt> and IF Meas <Pt> in channel <Ch>.
To set the formula, use [SENSe<Ch>:]PATH<Pt>:IFRequency
Suffix:
<Ch>
.
Channel number
SCPI command reference