Command reference
R&S
®
ZNA
1539User Manual 1178.6462.02 ─ 20
Example: See [SENSe<Ch>:]FREQuency:MDELay:LTONe
on page 1538
Manual operation: See "Lower Tone" on page 373
[SENSe<Chn>:]FREQuency:MDELay:MSTate?
Suffix:
<Chn>
.
Usage: Query only
MMEMory:LOAD:MDAData
<Channel Id>, <Filename or CDELAy>
Loads the known delay values of a calibration mixer, to be used as a reference for a
mixer delay measurement calibration. Mixer delay measurements are controlled using
the SENSe<Ch>:FREQuency:MDELay... commands.
Setting parameters:
<Channel Id> Channel number
<Filename or
CDELAy>
String parameter to specify the name and directory of the loaded
file. The default extension (manual control) for files containing
known delays is *.csv, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory?.
Example: See MMEMory:LOAD:MDCData on page 1539
Usage: Setting only
Manual operation: See "Constant Cal Dly/Variable Cal Dly" on page 372
MMEMory:LOAD:MDCData <Channel Id>, <Filename>
Loads correction data for a mixer delay measurement calibration from a specified file
and assigns it to a channel with a specified number. Mixer delay measurements are
controlled using the SENSe<Ch>:FREQuency:MDELay... commands.
Use MMEMory:LOAD:MDAData to load delay values of a calibration mixer stored in a
file.
Setting parameters:
<Channel Id> Channel number
*RST: -
<Filename> String parameter to specify the name and directory of the cali-
bration file to be loaded. The default extension (manual control)
for mixer delay calibration files is *.mcal, although other exten-
sions are allowed. If no path is specified the analyzer searches
the current directory, to be queried with
MMEMory:CDIRectory?.
SCPI command reference
To Next Page
Loading...
