R&S ZNA26 - Page 1542

Command reference
R&S
®
ZNA
1542User Manual 1178.6462.02 ─ 20
Example: See [SENSe<Ch>:]FREQuency<Pt>:OFFSet:PWAVes
7.3.20.3 Internal 2nd LO (R&S ZNA-B5)
[SENSe<Ch>:]MSMode <LO Sequence Mode>
Suffix:
<Ch>
.
Parameters:
<LO Sequence
Mode>
ALTernated | CHOPped
[SENSe<Ch>:]SLAMode <Port to LO Assignment Mode>
Defines the LO usage for channel <Ch>.
Suffix:
<Ch>
.
Channel number
Parameters:
<Port to LO
Assignment Mode>
OPTimized | DEFault
OPTimized
Use both LOs, if available
DEFault
Use only one LO
*RST: DEFault
Manual operation: See "LO Usage" on page 634
7.3.20.4 Other
[SENSe<Ch>:]PPORt<PPort>:BSHift.............................................................................1542
[SENSe<Ch>:]PRANge................................................................................................ 1543
CALCulate<Chn>:FORMat:WQPNormal.........................................................................1543
SYSTem:CORRection:FMPort[:STATe]........................................................................... 1543
[SENSe<Ch>:]PPORt<PPort>:BSHift <stimulus settings index>, <buffer shift value>
[SENSe<Ch>:]PPORt<PPort>:BSHift? <stimulus settings index>
Suffix:
<Ch>
.
<PPort>
Parameters:
<buffer shift value>
Parameters for setting and query:
<stimulus settings
index>
SCPI command reference