Operating the instrument
R&S
®
ZNA
34Getting Started 1178.6456.02 ─ 18
Customizing the screen
The contents of the screen and the size and position of many display and control ele-
ments are not fixed. You can display or hide most elements. You can also drag and
drop traces and info fields.
Using the Touchscreen
To access an instrument function:
1. Press a (virtual) key, e.g. the [Meas] key in the Trace section.
The corresponding softtool expands at the current docking position.
2. Make sure the "S-Params" radio button is selected.
3. Activate the desired softtool tab, e.g. "Wave".
Manual operation
To Next Page
Loading...
