R&S ZNA50 - Using the Windows On-Screen Keyboard

Operating the instrument
R&S
®
ZNA
54Getting Started 1178.6456.02 ─ 18
For the following procedure, we assume single-window mode.
1. Activate a character data input field in a softtool or a dialog.
2. Double-tap/click the input field to open the on-screen keyboard.
3. Select character buttons to compose the input string.
4. Select "Enter" to apply your selection and close the keyboard.
5.6.4
Using the Windows
®
on-screen keyboard
The Windows
®
on-screen keyboard allows you to enter characters, in particular letters,
even if an input field cannot call up the analyzer's own on-screen keyboard. Examples
are input fields in standard Windows
®
dialogs.
Figure 5-7: Windows 10 on-screen keyboard
To call up the on-screen keyboard:
1. Open the System – [Applic] softtool.
Entering data