Contents
Introduction 3
Technical specifications 4
System requirements 4
Preparing for work
Package contents 5
Installing software and drivers 7
Setting up your computer for work with the scanner
Connecting projector 8
Configuring computer parameters 9
Scanner Assembly
Scanner setup
ScanCenter NG launch 11
Select scanning zone 12
Calibration field parameters 13
Placing the calibration plate 13
Initial setup of cameras and lenses 14
Checking camera arrangement 15
Finding a working distance 15
Adjustment of the projector focus 16
Bringing the cameras together 16
Final calibration of the cameras 17
Calibrating the scanner
Calibration plate 21
Full calibration 23
Fast calibration (orientation) 25
Focus assessment during calibration 27
2
To Next Page
Loading...
