Need help?Do you have a question about the Rangevision SPECTRUM and is the answer not in the manual?
Key safety precautions for operating the RangeVision Spectrum scanner.
Details on scanning area, 3D point accuracy, and resolution for different zones.
Hardware and software prerequisites for proper scanner operation.
An overview of all items included in the RangeVision 3D scanner package.
Instructions for connecting the projector to the computer's video card.
Starting the ScanCenter NG software and checking hardware status.
Entering details about the calibration plate for configuration.
Instructions for positioning the calibration plate for setup.
Ensuring correct alignment and arrangement of the left and right cameras.
Determining the optimal working distance using the calibration plate.
Adjusting the projector's focus for sharp lines on the calibration plate.
Aligning both cameras to the same position at the working distance.
Adjusting lens sharpness and initial exposure settings for scanning.
Detailed steps for performing a full calibration of the scanner.
Quick calibration method for re-orienting the scanner.
Procedure for calibrating the rotary table's axis.
General| Technology | Structured light |
|---|---|
| Texture | Yes |
| Software | Rangevision ScanCenter |
| Light source | LED |
| Scanning Technology | Structured Light |
| Output Formats | STL, OBJ, PLY, ASC |
To Next Page
