Operating Instructions RS cure │ D cure │ P cure │ SHERAprint cure │ 3Decure
Rapid Shape GmbH │ DOCR000251
CA UT ION !
Risk of injury due to moving parts!
The machine consists in part of accessible parts that can
easily cause hand injuries through crushing or getting
caught.
— When closing the machine, do not insert any
fingers behind the shock absorbers and into the
support area of the lid.
1.3.3 Danger of Material Damage
NOTE!
Material damage due to overheating!
Too high ambient temperatures and a disabled air outlet
may lead to an overheating of the overall system.
— The air outlet must never be covered.
— Maintain the specified ambient temperature
(→ Chapter 10).
— Never install the machine in a closed cabinet.
— Keep a minimum distance of 20 cm behind the
machine so that the heat generated can be dissi-
pated without hindrance.
NOTE!
Material damage due to environmental conditions!
Separate environmental conditions may result in property
damage to the machine.
— Protect the machine from moisture, dripping water
and splashing water.
— Protect the machine from dust in excessive
quantities.
— Protect the machine from heat and direct sunlight.
— Keep open flames away from the machine.
— Do not place objects filled with liquids (such as
drinks) in the immediate vicinity of the machine.
1.4 Personnel Requirements
WA RNIN G !
Risk of injury in case of inadequate qualification
of personnel!
If unqualified personnel carry out work on the machine,
dangers arise which can cause injuries and material
damage.
— All activities must be carried out by qualified
personnel only.
To Next Page
Loading...