Rapid Connect - Page 19

4:7 Rapid Connect Monitoring System 2023-05-03
4. PORTAL
4.7. Howisthewebportalstructured?
Aggregateview
Aggregate view shows all data collected from all departments and machines in aggregate. This
means that, for example, the power consumption of all machines have been added to a sum and
averaged. The power consumption shown in the aggregate view is the average power consump-
tionforallmachines,duringthespeciedscope.
The aggregate view shows a list of all departments within a company and/or machines within a
department. The list shows:
• The name of the machine.
• The number of active alarms.
• Thetotalpowerconsumptionduringthespeciedinterval.
• Thenumberofhoursthemachinehasprocessedmaterialduringthespeciedinterval.
• The number of hours the machine has running idle.
• The number of hours the machine has been in stand-by mode (powered on, but not running).
• The current status of the machine, e.g. started, stopped, opened, closed, etc.
By default, all machines within a department are included in the summary. If you wish to remove a
machine from the summary, unmark the machine by toggling the checkbox next to the machine’s
name in the list of machines.
The chart at the bottom of the aggregate view shows a summary of the machines’ temperature,
power consumption and vibration levels. Only one aggregate can be shown at a time. Switch which
aggregate is shown in the graph by clicking the respective slide-toggle.