Rapid Connect - What Does the Status Icons Mean

INSTRUCTION MANUAL IB 109050 02 C03b
4:16
4. PORTAL
4.15. Whatdoesthestatusiconsmean?
Following icons indicate the status of the machine in summary:
(Green)
Good! No alarms are active, maintenance has been done.
(Yellow)
Accepted! No alarms are active, maintenance should be scheduled.
(Orange)
Warning!No alarms are active, maintenance should be carried out or the ma-
chine is overheated.
(Red)
Critical!An alarm is active, or maintenance is overdue.
Followingiconsindicatespecicalarms:
General alarm. The temperature in the
machine is rising, and has
reached the limit for warning.
An emergency stop is acti-
vated.
The temperature in the ma-
chine has reached the limit
for overheating.
The granulator’s main motor
is overloaded.
Reminder that maintenance
should be scheduled.
The blower’s main motor is
overloaded.
The date for scheduled main-
tenance is reached.
The infeed equipment’s main
motor is overloaded.
Scheduled maintenance is
overdue.
The machine’s hopper jack is
overloaded.
Scheduled maintenance is
performed.
The shredder is overloaded. Hydraulic pump is
overloaded.
The granulate bin is full.