Rapid Connect - How Do I Schedule Maintenance Reminders; How Do I Log Performed Maintenance

4:13 Rapid Connect Monitoring System 2023-05-03
4. PORTAL
4.12. HowdoIschedulemaintenancereminders?
2
4
5
6
3
1. Go to the machine level for the machine that you wish to schedule maintenance for.
2. Click the “Setup schedule” button on the maintenance widget.
3. Set the schedule name. This should be a description of the maintenance that is to be done, for
example “Change the knives” or “Check the drive belts”.
4. Setthemaintenanceinterval.Thisspecieshowoftenthemaintenanceshouldbecarriedout.
Refer to the service schedule in the machine’s instruction manual for general recommenda-
tions.
5. Settheremindertime.Thisspecieswhenyoushouldreceivearemindertocarryoutthe
maintenance.Theremindercanbedisplayedinthewebportal,orbesentasanemailorSMS
notication.Seesection5.5“HowdoIactivatenotications”onpage5:5.
6. Click the “Set schedule” button to set the schedule. The box “Active parameters” updates with
the current schedule.
7. The schedule is set.
4.13. HowdoIlogperformedmaintenance?
1. Go to the machine level for the machine that you’ve performed maintenance on.
2. Click the “Log maintenance” button on the maintenance widget.
3. Set the maintenance note. This should be a description of what has been done, for example
“Changed the knives” or “Tensioned the drive belts”.
4. Clickthe“Maintenanceperformed”button.Themaintenanceisloggedandtheintervalisreset.