Need help?Do you have a question about the Rational CMP 101E and is the answer not in the manual?
General warnings about installation, usage, and specific safety for gas units.
Safety measures for gas smell, explosion prevention, and flammable vapors.
Warning about scalding risk when handling hot liquids at higher levels.
Emphasizes local standards, liability for unauthorized changes, and proper installation.
Procedure for changing the air filter for different unit sizes.
Instructions for the initial automatic self-test and setup of the unit.
Safety measures during transport, including tilting, weight, and door clearance.
Specifies minimum clearance requirements for left, right, and rear sides of the unit.
Defines clearance for heat sources and safety notes on ambient temperature.
Recommends original stands and how to fix them to the floor for gas appliances.
Instructions for leveling the unit and fixing floor locks for stability.
Warning about hot cooking liquid and risk of scalding if incline exceeds 4°.
Highlights danger from high voltage and life-threatening situations during installation.
Covers general requirements, unit types, polarity, earth bonding, and connection standards.
Warns about electric shock, danger to life, and potential unit damage from incorrect connections.
General advice on checking connections, compliance, and using copper wire.
Stresses analyzing exhaust gases and documenting values for burner settings.
Warns about fire hazards, danger to life, and regulatory compliance for gas connections.
Covers gas connection thread, stop valves, installer requirements, and pipe matching.
Warns of suffocation hazards from combustion products and the need for ventilation.
Covers compliance, pipe material, and prohibition of welding for drain connections.
Guidelines for unit ventilation and warnings about flue gas hazards.
Tables for power, amps, fuse, and wire gauge for electric units in USA/Canada.
Table showing power kW and electricity consumption for electric units in Europe.
To Next Page
General