Ravas 3200 - 5.14 Relay function - optional

USER MANUAL – RAVAS-3200
34
13
15
16
14
Press enter
to continue.
For 0,5 sec the display shows the text
‘Net’ or ‘Net_C’.
Next the display shows the net weight.
Net: weight is measured.
Net_C: weight is calculated.
For 0,5 sec the display shows the text
‘tArE’ or ‘PtArE’.
Next the display shows the tare weight.
tare: weight is measured.
Ptare: weight is keyed in.
The indicator will automatically
return to the user setting ‘Alibi’
in the user menu.
For 0,5 sec the display shows the text
‘Code’.
Next the display shows the code used. If
no code was used the display shows ‘0’.
Press enter to search for another
weighing or press ‘CLR’ 2x to return to
the normal weighing mode.
Press enter
to continue.
5.14 Relay function - optional
The 3200 indicator has the possibility to setup limit values for relay settings. The di󰀨erent
options for relay settings are:
• overload on gross weight
• overload on net weight
• dosing / lling with manual tare & start
• dosing / lling with automatic tare & start
For the setup and activation of the relay settings please contact RAVAS Service department.