Ravelli Flexi 7 - Controls and Use; Control Panel Description

Manuale uso e manutenzione Flexi 7-9
Pag.33
Rev.0 18/05/2020
Controls and use
Control panel description
1
2
6
3
4
5
1 ON/OFF key;
SETTING WORK POWER
It is possible to use button 2 to change the delivered heat power.In order to increase power
press P2 once again.
Power LED 3 set on= work power 1
Power LED 3 set on and ashing 4= work power 2
LEDs 3 and 4 ash= work power 3
Power LED 4 set on and ashing 3= work power 4
Power LEDs 3 and 4 set on= work power 5
6 alarm LED active (red)