Raven AccuBoom - Important Safety Information; Chemical and Agricultural Product Safety

CHAPTER
2
INSTALLATION
___________________________________________________________
Use the following procedure to properly install the AccuBoom system on
a Spra-Coupe 3000/4000 Series sprayer using a Raven console connected
to a Raven Viper.
1. Connect the AccuBoom Control Node and Relay Box to the
AccuBoom Cable.
a. Connect the Parallel AccuBoom Cable P/N 115-0171-598 to the
Parallel AccuBoom Control Node P/N 063-0172-517
b. Connect the Parallel AccuBoom Cable P/N 115-0171-598 to the
5-Channel Driver P/N 063-0172-753.
Manual #016-0171-013 Rev. C 01/07
3