Need help?Do you have a question about the Raven CR Series and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Manufacturer | Raven Industries |
| Control Options | Manual or Automatic |
| Input Voltage | 12 VDC |
| Communication Protocol | CAN |
Highlights critical safety information and precautions for users. Avoids potential personal injury.
Describes the features and compatibility of CR7 and CR12 field computers.
Lists the various connection ports and interfaces available on the devices.
Describes the display specifications, including size, resolution, and brightness.
Outlines the computing hardware specifications like storage and processor.
Details the power input requirements and fuse specifications.
Provides physical dimensions and mounting details.
Specifies operating conditions like temperature and moisture protection.
Details the initial setup wizard and important configuration checks for first-time use.
Guides through a simplified machine configuration process for basic setup.
Explains how to set up a more detailed machine configuration for optimized guidance.
Explains the status bar and its icons for system and device status monitoring.
Explains the settings menu layout and how to use customizable shortcuts.
Lists and describes various settings screens available in the menu.
Guides on creating and configuring mounted implements for the machine.
Explains how to add and configure drawn equipment to the machine.
Provides steps to remove a previously configured machine from the system.
Guides users on creating new Grower, Farm, and Field entries in the system.
Describes how to edit existing Grower, Farm, and Field information.
Details the process for renaming Grower, Farm, or Field entries.
Provides instructions on how to delete Grower, Farm, or Field entries.
Details the steps to start a new job or resume an existing one.
Explains the process of initiating a new job in a new field.
Covers the initial phase of operation planning, adjusting boundaries and lines.
Details the planning phase for creating operation plans using boundaries and zones.
Details pre-planning steps for defining field boundaries and corners.
Explains how to edit the corners of a field boundary.
Guides on editing baselines within the pre-planning process.
Details the setup for tramlines within an operation plan.
Guides on creating and adding regions to an operation plan.
Explains how to adjust settings for specific regions in a plan.
Explains the icons available in the side bar of the run screen.
Introduces key widgets like AccuBoom Control, Master Switch, Product Rate, and Section Status.
Explains how to access additional settings for specific widgets.
Guides on configuring the switchbox widget settings for section control.
Details the process of creating a flag to mark field features or obstacles.
Guides on creating field boundaries, no-apply zones, and application zones.
Lists and describes different types of guidance lines available for creation.
Explains how to adjust display settings like brightness, mode, and colors.
Details how to adjust language, time zone, and measurement units.
Explains how to access and view serial port information and device details.
Details the configuration options for GPS ports and differential setup.
Explains how to view GPS satellite information and signal quality.
Explains how to configure the master switch settings and inputs.
Details how to manage ISOBUS devices and settings.
Explains lightbar configuration and options for visual guidance.
Describes how to access and view system notifications and history.
Explains how to manually create and configure network connections.
Guides on setting up a personal Wi-Fi hotspot for device connectivity.
Explains how to capture screenshots of the device display.
Guides on transferring captured screenshots to a USB drive.
Explains how to view screenshots after exporting them.
Lists and describes the different types of files handled by the file manager.
Provides steps for copying files to or from the device.
Guides on deleting files from the device.
Explains the safe procedure for removing a USB drive.
Details how to check for and install CRX software updates via Slingshot.
Lists available feature unlocks and their purposes.
Guides on downloading CRX software updates to a USB drive.
Explains how to install CRX software updates from a USB drive.
Covers checking for and installing ISO Node and GPS updates.
Provides information on SmarTrax system settings and diagnostics.
Details information on implement steering system settings.
Explains different types of feature unlocks available for CRX.
Guides on activating temporary feature unlocks.
Explains how to install permanent feature unlocks using a USB drive.
Specifies what is included under the limited warranty.
Outlines the duration of the limited warranty coverage.
Provides instructions on how to obtain service under warranty.
Explains Raven Industries' responsibilities for warranty claims.
Specifies what is included under the extended warranty.
Explains product registration requirements for extended warranty.
Specifies the duration of the extended warranty coverage.
Details the process for obtaining service under the extended warranty.
Explains Raven Industries' actions for extended warranty claims.
Lists exclusions and limitations of the extended warranty.
To Next Page
