22
13. To edit a piece of Drawn Equipment, press the Edit button.
14. To remove a piece of Drawn Equipment, press the Remove button on the
Machine Configuration screen.
NOTE: Resetting an implement or piece of equipment will not delete previously
created profiles but will place it back in the inventory.
GROWER, FARM, FIELD (GFF)
CREATE A NEW GFF
GFF data can be added to CRX prior to starting a new job.
1. On the Settings screen, press GFF . The Grower Farm Field Information
window will open.
2. Select New from the Grower column. The Add Grower window will open.
3. Press in the Enter Grower Name cell and enter the desired grower name.
4. Press Accept . The Grower Farm Field Information window will open.
FIGURE 7. Grower, Farm, Field Information
5. In the Farm column select New . The Add Farm window will open.
6. Press in the Enter Farm Name cell. Enter the desired farm name.
7. Press Accept .
To Next Page
Loading...
Need help?
General
