Need help?Do you have a question about the Raven SCS 450 and is the answer not in the manual?
General| Brand | Raven |
|---|---|
| Model | SCS 450 |
| Category | Control Systems |
| Language | English |
Safety precautions for working with the hydraulic system, including protective equipment and pressure awareness.
Safety guidelines for electrical connections, including polarity and disconnecting before maintenance.
Defines abbreviations and provides conversion formulas for various units of measure used in the system.
Guides users on calculating calibration values for boom, speed, meter, valve, and application rates.
Introduces a card for recording machine calibration values and instructions for its use.
Covers the installation of various speed sensors like Radar and GPS.
Details flow meter and control valve installation procedures.
Covers console mounting, cabling, and battery connections.
Explains the importance of the console's identification label for support and tracking.
Describes the function of console buttons, indicators, and display elements.
Guides users through console data entry and the essential initial programming procedure.
Steps to refine speed calibration values for Raven radar and Phoenix 10 sensors.
Details system features, data logging, and various alarms like Volume/Min Rate and Low Tank Fault.
Explains control valve delay, advance, zero speed shut-off, and the data lock feature.
Explains how to use the decimal shift feature to improve accuracy at low application rates.
Procedures for setting up the SCS 450 system after installation and programming.
Setup procedures for systems using an alternate bypass line configuration.
Steps for conducting field tests to verify system operation and target application rates.
Instructions for testing speed sensor extension cables for proper connectivity.
General maintenance practices to ensure the longevity of the machine and SCS 450 system.
Procedures for flow meter maintenance, adjustment, recalibration, and cable testing.
Identifies common console issues and provides corrective actions for troubleshooting.
Provides troubleshooting steps for inaccurate or unstable rate readings and control problems.
Lists part numbers for various components of the SCS 450 console system.
To Next Page
