CHAPTER
2
Manual No. 016-0159-831 3
C hapter 2
Introduction
Introduction
Congratulations on your purchase of the Raven SCS (Sprayer Control System) 450 Serial Interface! The
Raven SCS 450 is designed to provide uniformity of spray applications, regardless of the vehicle’s speed.
Utilizing a computer-based console, a speed sensor, a turbine-type flow meter, and a motorized control valve,
the SCS 450 also functions as an area monitor, speed monitor, and volume totalizer.
The operator sets the target volume per area to be applied, and the SCS 450 automatically maintains the flow.
A manual override switch allows the operator to manually control the flow for spot-spraying. The actual volume
per area being applied is displayed at all times on the console.
NOTICE
The performance of the SCS 450 relies on the
proper installation and preventative
maintenance of the system and the sprayer.
Review this Installation & Service Manual
thoroughly before operating the system.
To Next Page
Loading...
