CHAPTER
1
Manual No. 016-0159-831 1
C hapter 1
Important Safety
Information
Important Safety Information
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the SCS 450 Serial Interface system.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of your Raven equipment, contact
your local Raven dealer for support.
• Follow all safety labels affixed to the system components. Be sure to keep safety labels in good condition
and replace any missing or damaged labels. To obtain replacements for missing or damaged safety labels,
contact your local Raven dealer.
When operating the machine after installing the SCS 450 Serial Interface system, observe the following safety
measures:
• Be alert and away of surroundings.
• Do not operate the SCS 450 Serial Interface system while under the influence of alcohol or an illegal
substance.
• Remain in the operator’s position in the machine at all times when the SCS 450 Serial Interface system is
engaged.
• Determine and remain a safe working distance from other individuals. The operator is responsible for
disabling the SCS 450 Serial Interface system when the safe working distance has been diminished.
• Ensure the SCS 450 Serial Interface is disabled prior to starting any maintenance work on the machine or
parts of the SCS 450 Serial Interface system.
• Follow all label instructions for proper chemical mixing, handling, and container disposal methods.
NOTICE
To Next Page
Loading...
Need help?
General
