Raven RCM - Chapter 4 Operation; RCM-Sprayer Operation Settings; Product 1 Settings; Product 2 Settings

CHAPTER
4
Operation: RCM-Sprayer Operation Settings 17
CHAPTER 4 OPERATION
RCM-SPRAYER OPERATION SETTINGS
PRODUCT 1 SETTINGS
• Toggle product control to Manual mode
• Toggle the product on.
FIGURE 1. Product 1 Operation Page
PRODUCT 2 SETTINGS
• Toggle product control to Automatic mode
• Toggle the product on
• Set the target rate to 5.0
NOTE: The rate preset buttons may be used to set the target rate.