Safety Information
When using this machine, the following safety precautions should always be followed.
Safety During Operation
In this manual, the following important symbols are used:
● WARNING:
Indicates potentially hazardous situations, which if instructions are not followed, could
result in death or serious injury.
● CAUTION:
Indicates a potentially hazardous situation which, if instructions are not followed, may
result in minor or moderate injury or damage to property.
Important:
Indicates operational requirements and restrictions. Please read and follow these
instructions to ensure a proper operation and to avoid damage to the hardware.
Note:
Indicates further explanation or clarification. Reading this is highly recommended.
● WARNING:
To avoid hazardous electric shock or fire, do not remove any covers or screws other
than
those specified in this manual.
● CAUTION:
✔ Only use the AC adapter provided with the scanner. Use of other AC adapters may
lead to malfunction.
✔ To reduce the risk of fire, use only no.26AWG or larger telecommunication line cord.
✔ Disconnect the power plug by pulling the plug, not the cable.
✔ Do not touch the metal fingers of the ADF pad module. The edges are sharp and
touching them may result in injury.
✔ Keep the space around the AC adapter clear in case you need to quickly unplug the
AC adapter during emergencies.
✔ Damaged wires could cause fire or electrical shock. Keep the power cord straight
and without being twisted, bended, or scraped.
✔ Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
✔ Be sure not to bump or knock the scanner glass as it is fragile and could break.
✔ Do not subject the scanner to excessive vibration. It may damage the internal
components.
5
To Next Page
Loading...
Need help?
General
