Raven SCS 660 User Manual

CHAPTER
2
SCS 660 & 660M Serial Interface for Granular Applications Installation & Service Manual 3
C hapter 2 Introduction
Introduction
Congratulations on your purchase of the Raven SCS (Sprayer Control System) 660 Serial Interface! The
Raven SCS 660 is designed to provide uniformity of granular applications, regardless of the vehicle’s speed.
Utilizing a computer-based console, a speed sensor, an encoder, and a hydraulic control valve, the SCS 660
also functions as an area monitor, speed monitor, and volume totalizer. The SCS 660 and 660M may also be
used for granular applications. Refer to the SCS 660 & 660M Serial Interface for Liquid Applications Installation
& Service Manual (P/N 016-0159-841) for information on liquid applications.
The operator sets the target weight per area to be applied, and the SCS 660 automatically maintains the
application. A manual override switch allows the operator to manually control the application for spot
application. The actual weight per area being applied is displayed at all times on the console.
In addition to the features provided by the SCS 660, the SCS 660M features a master switch that allows control
of a single section boom function without the need for additional cabling.
NOTICE
The performance of the SCS 660 relies on the
proper installation and preventative
maintenance of the system and the sprayer.
Review this Installation & Service Manual
thoroughly before operating the system.

Raven SCS 660 Specifications

General

Brand	Raven
Model	SCS 660
Category	Recording Equipment
Language	English