5.Learning to Ride
Starting:
1) Insert the key into the electric locking hole and rotate clockwise to supply power.
2) Check if all switches, instruments, horn, front and rear brakes are functioning properly.
3) Before starting the vehicle: Sit securely on the seat and retract the side stand.
4) Slowly rotate the throttle grip inward to accelerate and outward to decelerate.
Note: When accelerating, release the brake lever to avoid triggering the brake power cut-off
function.
Accelerate smoothly and gently to avoid any danger or damage to vehicle
components. For initial driving, use the EC0 mode, and only switch to SPORT
mode after becoming fully familiar with the vehicle.
To Next Page
Loading...