1.Safety precautions
For your and others' safety, please read this chapter carefully!
Before riding:
Do not assemble, disassemble, or pack this all-terrain electric motorcycle alone. Teamwork is
essential.
Use the all-terrain electric motorcycle according to local regulations. It can only be ridden on
public streets or highways after registration.
You must understand local laws and comply with them when using the all-terrain electric
motorcycle.
When using the all-terrain electric motorcycle, it is recommended to carry this manual and other
purchase voucher documents.
Do not overload the all-terrain electric motorcycle: Avoid exceeding the weight limit of this
all-terrain electric motorcycle. No passengers without driving training other than the vehicle owner
are allowed to use this off-road electric motorcycle.
Ensure you have received training on the all-terrain electric motorcycle and understand all its
control functions.
Understand the capabilities, power, and limitations of the all-terrain electric motorcycle.
Familiarize yourself with the brake and motor systems for proper control. Practice braking in a clear
area until you can control the all-terrain electric motorcycle smoothly. The off-road mode of this
all-terrain electric motorcycle is powerful, and without proper knowledge and training, riders may
be seriously injured.
Avoid riding in a way that could cause slipping, as this may lead to loss of control or tire damage.
Modifying this all-terrain electric motorcycle in any way is not recommended, as it could result in
property damage and injury.
This all-terrain electric motorcycle is not a children's toy.
Always use Rawrr's dedicated lithium battery charger with an input AC voltage of 100-240V.
Before charging, check the charging port and charger for moisture or water. Do not charge in the
presence of flammable or explosive materials, high temperatures, high dust levels, or similar
hazardous environments. Disconnect the power promptly after charging is complete.
Charging below -10°C is prohibited, as it may damage the battery pack. Wait for the battery
temperature to rise before charging.
Perform a safety check before starting the motor or riding each time.
Pre-Ride Checklist:
Loose parts
No rattling or other noises due to loose or damaged components during riding.
If assistance is needed, contact an authorized dealer for inspection or call customer service.
Brakes
Check that the brake functions are operating correctly. When you squeeze the lever, the brakes
should provide positive braking action. Pressing the brakes while riding should cut off the motor
power output.
To Next Page
Loading...