4.Cycling Preparation
Please ensure that you have carefully read all items in Chapter P01 (Safety Instructions) of
this manual before cycling, focusing especially on the following items:
Check front and rear tires:
1) Tires are in good condition without any abnormalities.
2) Normal tire pressure is 200
∽
220 Kpa. Insufficient tire pressure can cause abnormal wear,
steering issues, lower speed, and reduced distance. Excessive tire pressure can lead to localized
abnormal tire wear, reduced tire grip, decreased riding comfort, and even tire burst, posing
safety hazards.
Check LCD display, horn, and brakes:
1) Verify the normal functioning of all instrument displays.
2) Ensure the horn is operating correctly.
3) Grip the front and rear brake levers separately to check if both brakes are functioning properly
and if the front and rear wheels are working correctly.
Check vehicle lights and wiring functions:
1) Power on the vehicle and verify if the instrument panel and lights are functioning properly.
2) Check if the front/rear turn signals are synchronized.
Check handlebars:
Handlebars should be securely tightened without any swing, flexible, without interference, and
without strange noises.
Adjust suspension:
Adjust the front and rear suspension according to actual conditions to meet your riding needs.
Please be sure to wear a helmet and protective gear. For your safety, please
choose a full-face off-road helmet and off-road protective gear. The images
provided are for illustration purposes only; please take comprehensive safety
precautions. Do not lend the electric off-road motorcycle to individuals who
are unfamiliar with or unable to operate it. One-handed driving, riding
recklessly, or driving under the influence of alcohol are all very dangerous
activities.
To Next Page
Loading...