Raymarine AIS500 - Connecting Power

D1
1648-1
SeaTalk spur
ng
Connect to boat's SeaTalk system
ng
2.ConnecttoaconvenientpointontheSeaT alk
ng
system.
Connectingpower
Powersupplyprotection
Alwaysprotectthepowersupplybyconnectingthered(positive)
wiretothesupplyviaa5Afuseorequivalentautomaticcircuit
breaker.
Sharingabreaker
Thetextwithintheillustrationhasbeenupdatedforclarity
Wheremorethan1pieceofequipmentsharesabreakeryoumust
provideprotectionfortheindividualcircuits.E.g.byconnectingan
in-linefuseforeachpowercircuit.
D11637-1
+VE bar
Circuit breaker
FuseFuse
-VE bar
Where possible, connect individual items of
equipment to individual circuit breakers.
Where this not possible, use individual in-line
fuses to provide the necessary protection.
Powerconnectionprocedure
Theuseofcrimpedandsolderedlugsisrecommended,toprovide
optimumconnectiontothepowersource.
ConnecttheAIS500transceiverpowercabletoeithera12Vdcor
24Vdcpowersourceasfollows:
1.Ensuringtheintendedpowersourceisswitchedoff,connectthe
redwireviaa5Afuseorequivalentautomaticcircuitbreaker
tothesupplypositiveterminal.
2.Connecttheblackwiretothesupplynegativeterminal.
Installationprocedures
33