What to do if no instrument data is displayed on Raymarine C-Series GPS?
If no instrument navigational or engine data is displayed on your Raymarine GPS, verify that the instruments or engine interface are operating correctly. Also, check that the SeaTalk/NMEA connections are correctly connected to the display and that all SeaTalk/NMEA cables are free from damage and corrosion.
Why does my Raymarine C-Series GPS display keep switching off?
If your Raymarine GPS display switches off, you should: * Check the power input connection at the rear of the display to ensure it is secure. * Inspect the power cable for any signs of damage or corrosion. * Examine your boat’s power supply for faulty connections or if the cable diameter is insufficient.
How to fix Raymarine C-Series display not powering up?
If the Raymarine GPS display does not power up, make sure the power supply cable is in good condition and that all connections are secure and free of corrosion. Also, check the relevant fuses and verify that the power source provides the correct voltage and sufficient current.
What to do if no instrument navigational data is displayed on Raymarine GPS?
If you are not seeing any instrument navigational data on your Raymarine GPS display, make sure that: * The instruments are working correctly. * The SeaTalk/NMEA is correctly connected to the display. * All SeaTalk/NMEA cables are free from damage and corrosion.
How to fix a very dull or hard to view Raymarine C-Series GPS display?
If your Raymarine GPS display is very dull or hard to view, check if the PALETTE is set to DAY and check the backlight level.
Why Raymarine C-Series has no fix displayed against GPS status icon?
If there is no fix displayed against the GPS status icon on your Raymarine GPS, you should: * Check the GPS status. * Make sure the GPS antenna has an unobstructed view of the sky. * Verify the connections and operation of the GPS antenna.
What to do if my Raymarine C-Series display switches off?
If your Raymarine GPS display is switching off, consider the following: * Check that the power input connection is securely connected to the back of the display. * Inspect the power cable for any signs of damage or corrosion. * Examine your boat’s power supply for loose connections or if the cable diameter is insufficient.
General| Chartplotting | Yes |
|---|---|
| Waterproof Rating | IPX6 |
| WAAS | Yes |
| Weight | Varies by model |
| Display Type | LCD |
| Resolution | 640 x 480 pixels (C70), 800 x 480 pixels (C90W) |
| GPS Receiver | Integrated |
| Networking | NMEA 2000 |
| Chart Compatibility | Navionics |
| Radar Compatibility | Yes, Raymarine radar systems |
| Sonar Compatibility | Yes, Raymarine sonar systems |
| Power Supply | 10-32V DC |
| Dimensions | Varies by model |
Describes the physical buttons and controls on the device for operation.
Explains how to operate the device using buttons, soft keys, and cursor.
Guide to customizing screen layout, pages, and windows.
Instructions for inserting and removing CompactFlash cards for data.
Explains the purpose and basic elements of the chart display interface.
Details on changing chart orientation and motion mode settings.
Instructions for viewing detailed information on chart features and nearby services.
How to place, manage, edit, and delete waypoints for navigation.
Guide to building and following routes using waypoints.
Explains radar display elements and how to measure range and bearing.
Configuration of guard zones for collision avoidance alarms.
How to use the Mini Automatic Radar Plotting Aid for target tracking.
How to display and interpret Automatic Identification System (AIS) data.
Using the Course Deviation Indicator (CDI) to monitor boat course.
How to interpret fishfinder displays and recognize bottom types.
Adjusting fishfinder settings like range, frequency, and gain.
How to view system data, engine status, and fuel information.
How to view weather forecasts and marine warnings via Navtex receiver.
To Next Page
